Stainless steel Floor Trap Grating Manufacturer[FTG-102SS,103SS,104SS,202SS]

Stainless steel Floor Trap Grating Manufacturer[FTG-102SS,103SS,104SS,202SS]

The floor drain is an important interface connecting the drainage pipe system and the indoor ground. As an important part of the drainage system in the house, its performance directly affects the quality of indoor air and is very important for the control of odor in the bathroom. Implement the national standard “floor drain” (GB/T 27710-2011).
basic introduction
1. The floor drain is a drainage appliance that connects the ground to the drainage pipe system.
2. The special feature of the floor drain: it excludes ground water, water stains, solids, fiber, hair, easy deposits, etc.
3. The main function of the floor drain:
Anti-odor, anti-clogging, anti-cockroach, anti-virus, anti-reflow, anti-drying (mainly refers to water-sealed floor drain)
The quality of the floor drain is mainly reviewed from four perspectives: drainage speed, deodorization effect, ease of cleaning, and durability without mechanical principles.
Cognitive floor drain
Floor drains should have four characteristics: fast drainage, anti-odor, anti-clogging, and easy to clean.
Floor drain, floor drain, as the name suggests, is to drain, the single function of the floor drain is no longer keeping up with the times.
The floor drain must not only be launched quickly, but the most important thing is to prevent it from clogging. Otherwise, if it is too old to clean it, there will be endless troubles.

H-2_cr

Key points of floor drain selection
1) The CJ/T 186-2003 standard only applies to floor drains used in general industrial and civil buildings. It is not applicable to special places such as anti-wave floor drains for civil air defense projects and explosion-proof floor drains for petrochemical enterprises. For floor drains in special places, in addition to referring to this standard, they should also meet the technical requirements of related industries.
2) Water seal is one of the important features of water-sealed floor drains. When selecting, it should be understood whether the depth of the water seal of the product reaches 50mm. Side wall floor drains, floor drains with screen frames, and closed floor drains generally do not have water seals; most of the overflow-proof floor drains and multi-channel floor drains have water seals. The selection should be based on the manufacturer’s information.
For floor drains without water seals, a water trap with a depth of not less than 50mm should be installed in the drain pipe. This component can be configured by the floor drain manufacturer, or set by the construction unit that installs the floor drain.
3) The height of the floor drain grate can be adjusted, and the adjustment height is not less than 35mm to ensure that the floor drain surface elevation is level with the ground after the ground decoration is completed. The floor drain is equipped with a waterproof wing ring to meet the waterproof requirements when the floor drain is installed on the floor.
For floor drains located in underground garage car passages or load-bearing places, the strength of the grate should be able to meet the corresponding load.
4) The structure of the floor drain with water seal should be reasonable and smooth, and the debris in the drainage is not easy to settle; the cross-sectional area of ​​each part of the water should be greater than the cross-sectional area of ​​the discharge pipe, and the minimum clear width of the flow channel should not be less than 10mm.
5) There are three ways to connect the floor drain: socket; thread; clamp. The size of the connection port can be determined in accordance with the current national regulations
6). Deodorant floor drains should be used first, and floor drains may not be installed where drainage is not required. The floor drain reserved by the builders shall not be completed without a backwater bay.

Next →