Magnetic Translucent PVC seals strip manufacturer [TSS-008A,008B,008C]

Magnetic Translucent PVC sealing strip manufacturer [TSS-008A,008B,008C]

Introduction to the installation method of the shower room PVC seals strip

1. When paving the floor tiles, generally speaking, a groove will be reserved. At this time, cement mortar can be used to pave it. At this time, put the marble shower room PVC seals strip and build the shape of the shower room PVC seals strip with bricks. , And then pave the floor tiles or marble slices. When laying the floor tiles, embed the shower room PVC seals strip in the floor tiles. Then its skirt is just a few millimeters higher on the outer edge of the shower room PVC seals strip. This kind of shower room PVC seals strip is actually used as a stone base under the shower room with glass, and the glass is placed in the middle of the shower room PVC seals strip. Yes, the skirt is also to prevent water from seeping into the shower room PVC seals strip from under the glass.

2. For the shower room PVC seals strip used for the shower curtain, measure the installation height during installation, so that the shower curtain can sag naturally and hang into the shower room PVC seals strip for about three centimeters. Only when this is achieved is the best installation effect. , And after this installation, the water will not splash out at all. For example, the biggest disadvantage of a skirt is that if there is no glass pressing on the shower room PVC seals strip, because the inside and outside of the shower room PVC seals strip is not generally high and the force is uneven, then it may cause the glass glue underneath for a long time. Loosening occurs.

G-8_cr

← PreviousNext →